Sony Camera Improvements Requested by Photographer

I've used a lot of cameras. I have had hands-on experience with basically every Sony release for the past five years, plus the latest from Nikon, Canon, Leica, Fujifilm, and even Hasselblad. My main workhorse and my everyday carry camera is still Sony. Not because they're perfect, but because they give me things no other brand does, like the global shutter in my a9 III or the sheer amount of tech packed into something as small as the RX1R III.

But perfect and good aren't the same thing. There's a list of changes that could make every Sony camera better, and the wild part is that most of them wouldn't require new hardware. Firmware updates could handle almost everything below.

This Isn't a Pointless Wishlist

Before I get into the list, I know what this looks like. Some random person complaining about menu items nobody at the company will ever read. But I know for a fact that people at Sony watch videos (and read articles) like this, and I know for a fact they listen and make changes based on user feedback.

I know this because I've had the honor of attending a Sony Kando Trip, one of the creator events Sony puts on, and I've talked directly with Sony engineers. I've made requests that actually got implemented. I don't know if I was the specific person who caused any particular change, but I know I was at least one of the voices asking for it.

A good example: dial switching used to trigger a pop-up confirming the settings tied to whatever custom position you just switched to, whether that was M to 1 or 1 to 2. It killed the whole point of having quick-change dials, because you had to confirm the change before you could shoot. Now, on newer Sony cameras, flipping the dial just jumps your settings instantly, no confirmation needed. That's the kind of thing that gets fixed when enough people ask for it. So here's my list, and if you agree with any of it, say so. If I'm missing something you want, say that too, because now you know Sony might actually be reading what you say.

Save Autofocus Behavior to the Custom Dials

There's a setting that adds or removes autofocus from the shutter button. Most of the time I shoot with back-button focus and don't want AF tied to the shutter, but there are specific situations where I do need it there. Right now, that means keeping the setting pinned in my custom menu and diving in to toggle it manually every time. What I want is for this specific setting to save directly to the 1, 2, and 3 custom memory recall positions on the dial, so switching focus behavior is just a flick instead of a menu hunt in the middle of a shoot.

Fix the Custom Button Inconsistencies

Sony does custom buttons better than most other brands as a whole, but there's still a real inconsistency problem. Press some custom buttons and you get a menu to scroll through. Press others and the button just cycles through the available options directly. The display button cycles. The shutter type button opens a menu. There's no reason both behaviors can't be a choice you make when setting up the button, something as simple as a checkbox for "show menu" versus "cycle."

On top of that, I want the ability to remove items from any menu tied to a custom button, the same way we can already trim down the display cycle so it only shows nothing or shows everything. Fewer irrelevant options means less scrolling. Some settings that could use this treatment:

• White balance
• AF modes
• Drive modes
• ISO options

For a lot of what I shoot, I'd rather have a button just toggle between two settings I actually use, even if the camera technically offers more. Shutter type is a good example. Some cameras give you electronic, mechanical, and electronic front curtain. I'd happily drop front curtain and just bounce the button between electronic and mechanical. Same with white balance. I only ever use three or four presets, so those are the only ones I want to see when I press that button. AF subject tracking is another one. I never need cars, planes, trains, or bugs. Other people do, and that's fine, and here Sony actually lets me pull those off my button so I'm not scrolling past things I'll never select. Now I want this for all the buttons.

Give Me Press-and-Hold Options

I want the ability to set certain custom buttons to "press and hold" instead of "press to change." The C5 boost button on the a9 III is a perfect example. Press and hold it, and the camera jumps to a higher programmed frame rate, say from 5 frames per second up to 120, or 60, or 30, whatever it's set to. Let go, and it drops back to whatever you had originally.

I want that behavior for other settings too. APS-C mode is the obvious one for me. I love having a button for it, but I constantly leave it on by accident or forget to turn it off. A press-and-hold version would mean I'm shooting in crop mode only while the button is down. Pre-capture is another good candidate. I only need it for specific situations, and it's another setting I regularly forget to switch off, which leaves me digging through a pile of extra images later. Tie it to a hold instead, and it's only active while my finger is on the button. Sony actually has these two options for that boost button I talked about, though I think the implementation would need to change if it were available for every or most buttons.

Let Every Button Do Press, Hold, and Double Press

Both the Nikon ZR and the Sony FX5 already do this on one button: a press brings up a quick menu, and a long press brings up the full menu. I want that logic available on every custom button, with press, press-and-hold, and even double-press all mapped to different functions.

Picture the C1 button set up like this:

• A single press opens the minimum shutter speed menu
• Press-and-hold enables APS-C mode
• Double press cycles between mechanical and electronic shutter

That's three functions living on one button instead of one, which matters a lot on cameras with a limited number of custom buttons. It would also open up more interesting programming for buttons like play, where you'd still get quick image review but gain extra functionality layered on top.

More Aspect Ratios for Soft Cropping

This one I'm stealing straight from the Fujifilm GFX100RF: the ability to soft crop to more aspect ratios. Give me 65:24, 5:4, 1:1, all of it. It's a soft crop, so the JPEG or HEIF is recorded at the selected aspect ratio, while the raw file retains the full-resolution image data and can be developed at a different aspect ratio later. The Sony RX1R III does something similar with its Step Crop Shooting feature: JPEG and HEIF files are cropped, while raw files retain the full frame with crop information stored in the metadata.

For this to actually be great, it needs the same trimming ability I asked for above. One of my biggest complaints with the GFX100RF was that I only wanted three or four of the available crop ratios, but I still had to cycle through every option on the dial to get to them.

A Real Flash Kill Switch

This one is old. It was already on the Nikon D750 back in the day: a button you press and hold that simply won't let the flash fire. Right now on Sony, I can set a button to access flash mode, but that only opens a menu. There's no quick way to just kill the flash with a button press. But even if I go this route, when I've tried to access a flash-off setting directly, it shows up grayed out and unselectable in every mode I've tested. My guess is that this only works with Sony-branded flashes, but if anyone knows the actual reason, I'd like to hear it. Either way, I want a quick, universal flash-off option that works regardless of what flash is mounted.

Let Me Customize the Swipe Menu

Sony introduced a swipe-left-and-right menu, I believe starting with the ZV-E1, and it's genuinely handy. It works like a second Fn menu, with quick access to items you can hide when you don't need them. The problem is that whatever Sony has programmed into those slots is fixed. You're stuck with it.

I'm never going to use that menu to change my memory camera settings or to start recording, but those are the options I'm given. I already have full editing control over the Fn menu, so giving that same control to the swipe menu should be a straightforward add.

Fix the Exposure Compensation Preview

This one is more of a bug than a feature request. The old exposure compensation dial had plus and minus markings physically etched into it, which limited it to plus or minus 3 stops. Current dials are blank, so you can program them for anything, but I still prefer using it as the exposure compensation dial. The upside of a blank dial is that you can now dial in plus or minus 5 stops. The problem is the exposure preview still cuts off at plus or minus 3. Past that point, the preview stops reflecting what the final image will actually look like, even though the camera can absolutely show that same preview correctly if you dial in the identical se